original Tungsten Carbide die 「Tokyo-ACE 」

The Machinery Parts such as Nozzle for the Winding Machine

  • HOME »
  • »
  • The Machinery Parts such as Nozzle for the Winding Machine

Nozzle for WC-Co (Carbide) Winding

Nozzle for WC-Co (Carbide) Winding

Nozzle for WC-Co (Carbide) Winding

When we wind up a wire in the shape of a coil in the production such as motors, an automatic winding machine is used. It seems to increase to use the WC-Co (Carbide) winding nozzle for a bit to wrap with the wire of the machine

Because the WC-Co (Carbide) is superior for the abrasion resistance and the smoothness of side surface, it would be suitable for the winding nozzle where the wire move inside with a high speed.

Our company would be able to produce the complex shape that corresponding to the special coil winding.

We would make in any shapes along the demand of any customers.

Various Machinery Components

Various Machinery Components

WC-Co (Carbide) component
Processed by the lapping finish for the inside and finished up in sharp of R0.03 or less for the edge of the inner surface.

Various Machinery Components

WC-Co (Carbide) Nozzle
Picking the through hole with 0.8mm in diameter and 70mm in depth.

Various Machinery Components

Press-fitted WC-Co (Carbide) to the squared lumber of the dies steel. Into the WC-Co (Carbide) component with0.2mm in diameter and 2mm in depth.

Various Machinery Components

For all tube expanding tool of WC-Co (Carbide)
Picking a tapping hole on the bottom with the size of 58mm in diameter and 67mm in length.

 

  • Facebook
  • Hatena
  • twitter
  • Google+

LANGUAGE SELECT:

  • 日本語
  • English
  • 中文
Contact usTokyo Byora Thailand Co.,Ltd. What’s about the Tungsten Carbide Heading Dies?
The EDM to the Tungsten Carbide
Reproduction of Tungsten Carbide Dies and Punches
What's about the Cold Heading Process?
.
PAGETOP
Copyright © TOKYO BYORA KOKI Co.,Ltd All Rights Reserved.
Powered by WordPress & BizVektor Theme by Vektor,Inc. technology.